The 5 Whys is a questions-asking method used to explore the cause/effect relationships underlying a particular problem. Ultimately, the goal of applying the 5 Whys method is to determine a root cause of a defect or problem.
Contents |
The following example demonstrates the basic process:
The questioning for this example could be taken further to a sixth, seventh, or even greater level. This would be legitimate, as the "five" in 5 Whys is not gospel; rather, it is postulated that five iterations of asking why is generally sufficient to get to a root cause. The real key is to encourage the trouble-shooter to avoid assumptions and logic traps and instead to trace the chain of causality in direct increments from the effect through any layers of abstraction to a root cause that still has some connection to the original problem. Note that in this example the fifth why suggests a broken process or an alterable behaviour, which is typical of reaching the root-cause level.
It's interesting to note that the last answer points to a process. This is actually one of the most important aspects in the 5 Why approach...the real root cause should point toward a process. You will observe that the process is not working well or that the process does not even exist. Untrained facilitators will often observe that answers seem to point towards classical answers such as not enough time, not enough investments, or not enough manpower. These answers may sometimes be true but in most cases they lead to answers out of our control. Therefore, instead of simply asking the question why?, ask the question Why did the process fail?
Keep in mind the following key phrase as a background thought in any 5 why exercise: "People do not fail, processes do!"
The technique was originally developed by Sakichi Toyoda and was later used within Toyota Motor Corporation during the evolution of their manufacturing methodologies. It is a critical component of problem solving training delivered as part of the induction into the Toyota Production System. The architect of the Toyota Production System, Taiichi Ohno, described the 5 whys method as "the basis of Toyota's scientific approach . . . by repeating why five times, the nature of the problem as well as its solution becomes clear."[1] The tool has seen widespread use beyond Toyota, and is now used within Kaizen, lean manufacturing, and Six Sigma.
There are two primary techniques used to perform 5 whys[2]: the fishbone (or Ishikawa) diagram, as well as a tabular format.[3] These tools allow for analysis to be branched in order to provide multiple root causes for remedy.
While the 5 Whys is a powerful tool for engineers or technically savvy individuals to help get to the true causes of problems, it has been criticized by Teruyuki Minoura, former managing director of global purchasing for Toyota, as being too basic a tool to analyze root causes to the depth that is needed to ensure that the causes are fixed.[4] Reasons for this criticism include:
These can be significant problems when the method is applied through deduction only. On-the-spot verification of the answer to the current "why" question, before proceeding to the next, is recommended as a good practice to avoid these issues.